Most of the parts available on my website require advanced skill to install on your build. Fabrication or modification of them may be required due to the broad range of applications to which they are suited. Be sure to use appropriate protection when working with tools or chemicals which represent a potential threat to your personal well-being.

PRODUCT DELIVERY - My goal is to ship within one week's time of receipt of payment, however, please allow up to four weeks for delivery. I will contact you if I foresee a significant lag in order fulfillment. Delivery times subject to change. If you encounter problems ordering parts, please feel free to contact me at scott@futurattraction.com.
I am in the process of rebuilding my website.  Please be patient while I add pictures, descriptions, and pricing info.

RU-FTI-2  Frontrunner Tire 
$7.00
Drag race-inspired Frontrunner-styled front tire.  It is a direct replacement for Revell-Monogram front wheels.  Tire OD is ~1.050".  Sidewall width is ~.285".
 
 
 
 

RU-1432-2 14x32 Drag Slicks  $8.00/pr  New and improved!
Tire ID is designed to work with earlier 1/25th scale wheels. These slicks replicate the popular 14x32-15 drag slicks used on lots of higher horsepower cars of today and was the standard tire used for 70s and 80s vintage Pro Stock, Gas Glass, Modified Production, and faster Super Stockers.  These tires are designed to fit a scale 15" wheel.  Tire OD is ~1.31".  Sidewall width is ~.750".  Tread width is ~.625".  They were redesigned, with the use of 3D modeling to improve their appearance and realism.  The recess around the ID of these slicks was removed so there is a cleaner fit with the wheel and the method of molding has reduced venting to almost nothing, so the tread surface is greatly improved where vented.  Scuff the tread surface to eliminate the mold line and they're ready to install!
   
Side-by-side comparisons (above) with vintage AMT/MPC pro stock slicks.



RU-1633-2 16x33 Drag Slicks  $9.00/pr

These slicks replicate some of the larger drag slicks used in drag racing today and fit several of the Revell-Monogram Pro Stock and Top Fuel/Funny Car wheels.  Tire OD is ~1.375".  Sidewall width is ~.840".  Tread width is ~.670".  The ID of these tires has been reduced to be a snug fit on 1/24th scale wheels.  These tires were improved through 3D design and include an improved tread surface to reduce venting to a minimum.  The sidewalls were also redesigned to offer a bit more realism in their profile.  It is recommended that the builder consider gluing the wheel halves together, then fitting the tires over the wheels, since there is considerable stretch in the tires.  The left-hand picture, below, is with the wheel mounted that way.  These slicks will also work with 1/25th scale diameter wheels, but will be somewhat smaller in outside diameter.
   
Side-by-side comparisons (above) with Revell-Monogram slick.  Wheel used for illustration purposes only.  Not included.



RU-1736-2 17x36 TF/FC/PM Drag Slicks, 1/24th Scale  $10.00/pr
These slicks reflect the dimensions that are used in unlimited categories like Top Fuel, Funny Car, and supercharged alcohol classes, including Pro Mod.  They are made of the same soft, pliable rubber like my other tires, and are designed to fit 1/24th scale wheels.  The photos, below, are a side-by-side comparison of my 1736 slick (left) with a Pegasus slick.
  



RU-MT4-1 Mickey Thompson Sportman Pro Big 'N Little Set  $16.00/set
This four-tire set includes 2 M/T Sportman Pro tires that are based on 29x12.5-15 rear tires and 26-x7.5-15 fronts.   They are designed to fit 1/25th scale wheels.  Suggested wheel widths are ~.400" rear, and .200-.220" front.




W-ALU-2F Weld AlumaStar Front Wheels  $20.00/pr
These wheels replicate Weld Racing's AlumaStar 2.0 wheels and consists of two CNC machined aluminum wheels sleeves.  Dimensions are .660" OD x .200" wide.  Also included are two CNC'd spindle caps/bosses and 2-piece photo-etched centers.  These wheels fit Revell-Monogram Goodyear Frontrunners and Moroso Drag Specials, as well as my own RU-FTI-2 tires.

Aluminum wheel assembly instructions



W-ALU-2R Weld AlumaStar Rear Wheels  $30.00/pr
These rear wheels are 1/24th scale and replicate Weld's AlumaStar 2.0 design.  They consist of CNC machined aluminum sleeves which measures out with a .730" OD and width of .730".  Please refer to my aluminum wheel assembly instructions to see how they go together.  Tire shown is my RU-1633 (not included).  Also shown, but not included, is bead lock W24-BDL-WR4.






W-ALU-SET Weld AlumaStar Wheels  $45/set of 4
Combination of W-ALU-2F and W24-ALU-2R, above 




W-CAD-4 - Centerline AutoDrag Wheels  $10.00/set

Includes wheel fronts, custom open rear rings (for visible brake detail). Fits 1/24th scale Revell-type rear slicks. (10 pcs)




W-CDS1-4 Cragar DragStar Wheels  $10.00/set
Includes wheel fronts, custom open rear rings (for visible brake detail). Fits 1/24th scale Revell-type rear slicks. (10 pcs)




W-CO5-2F Billet Specialties Comp5 Front Wheels  $20.00/pr
Comp5 wheel, below, shown mounted on Moroso kit tire.  Basic wheel rim measurements are .660" OD and .200" wide.   These wheels replicate Billet Specialties' Comp5 drag racing front wheels, and consist of a pair of CNC'd aluminum rims, plus CNC spindle caps and two-piece photo etch wheel centers.  Assembly required.  To see how they are assembled, please see aluminum wheel assembly instructions. 
Tires not included!





W24-CO5-2R Billet Specialties Comp5 Rear Wheels  $30.00/pr
This is the corresponding rear wheel that matches the above fronts.  As with all of my currently available 1/24th scale aluminum wheels, they measure .730" OD and .730" width.  The sample wheel, shown below, has my W24-BDL-BS-4 photo etch bead lock ring, which comes separately.  Please see how they are put togehter by going to my aluminum wheel assembly instructions.




W24-CO5-SET  Billet Specialties Comp5 Wheels  $45/set of 4
Combination of W-CO5-2F and W24-CO5-2R, above.




W-CST1-16-4H Cragar SuperTrick Wheels, Hub-Mount Fronts,  4 Wheel Set  $10.00/set
Custom, 3D-printed wheels.  Rears fit 1/24th scale, or can be used to replicate a 16-inch wheel in 1/25th.  Front wheels are 15" and fit Revell/Monogram tires.  Includes four wheel fronts, four rear rings, two front hubs.  Both wheels use a crowned center with double-drilled bolt circle.  Simulated lug nuts and studs will need to be added, if so desired.  Rear wheel shown fitted to Firesone pro street tire (not included).  (10 pcs)
   




W-CST1-16-4S Cragar SuperTrick Wheels, Spindle-Mount Fronts, 4 Wheel Set  $10.00/set
Custom, 3D-printed wheels.  Rears fit 1/24th scale
, or can be used to replicate a 16-inch wheel in 1/25th.  Front wheels are 15" and fit Revell/Monogram tires, and are the focal point of this set. Set includes four wheel fronts, four rear rings and two front hubs.  These wheels use a double-drilled pattern on the rears, but have a beautiful spindle mount design for the front wheels.  I have no doubt these are the nicest wheels in the model aftermarket if you are trying to replicate early pro stockers or funny cars!  Second pic shows wheel fitted to a kit slick (not included).  (10 pcs)
   




W-CST1-4H Cragar SuperTrick Wheels, Hub-Mount Fronts, 4 Wheel Set  $10.00/set
Custom, 3D-printed wheels.  Rears are for 1/25th scale, and replicate a 15-inch wheel.  Front wheels are 15" and fit Revell/Monogram tires.  Includes four wheel fronts, four rear rings, two front hubs.  The wheels use a crowned center with double-drilled bolt circle, both front and rear.  Simulated lug nuts and studs will need to be added, if so desired.  They are an outstanding replica of the popular drag race wheels from the 1970s and early '80s.  (10 pcs)




W-CST1-4S - Cragar SuperTrick Spindle Mount Wheels, 4 Wheel Set  $10.00/set
Custom made to replicate 15" wheels used on 1960s-80s era drag cars. Crowned centers are present on both front and rear wheels, with double-drilled pattern on rear wheels. Front wheels are spindle mount design.  This design has replaced my original crowned version.  (10 pcs)





W24-DEL-2R  Weld Delta 1 Rear Wheels  $36.00/pr
These one-piece CNC-machined 1/24th scale rear wheels replicate Weld's contemporary drag race wheel.  OD and width are both ~.730".  The outer wheel rim includes a scallop-machined surface to replicate bead lock rings.  The back side rim face is plain.  The lower picture demonstrates that a Delta 1 wheel can be mounted on a kit two-piece Goodyear slick.  It takes a bit of wrangling to get the wheel fitted to the two-piece slick, but it is possible to do.  Slick not included.  As with my other CNC wheels, these will fit my RU-1633 and RU-1736 slicks.


 




W-MAG-2F Weld Magnum Front Wheels  $20/00/pr
These wheels represent Weld's Magnum 2.0 design.  As with my other aluminum front wheels, they measure out at .660" OD and .200" width.  IIncluded in the package are two CNC spindle caps and two-piece photo etch wheel centers.  This is the link to my aluminum wheel assembly instructions.


Shown mounted on RU-FTI front tire (not included)
 



W-MAG-2R Weld Magnum Rear Wheels $30.00/pr
Weld Magnum rear wheel, shown without bead lock ring.  Mounted on RU-1633 slick (not included).
 




W24-MAG-S  Weld Magnum 4-Wheel Set  $45/set of 4
Combination of W-MAG-2F and W24-MAG-2R, above.


W24-VSE-2R Weld V-Series Rear Wheels  $30.00/pr
V-Series rear wheel shown with optional W24-BDL-WR-4 bead lock ring installed.  Please refer to my aluminum wheel assembly instructions to see how they are assembled.



W-WSL1-4 Weld SuperLite Wheels  $10.00/set
Includes wheel fronts, custom open rear rings (for visible brake detail). Fits 1/24th scale Revell-type rear slicks. (10 pcs)